Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$59.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm
$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$19.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)
$9.99
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
$24.99
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
$30.99
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$9.99
Our best and favorite chain lube. Relatively inexpensive, easy to use, cleans and lubes at the same time. I have never found anything to compare to Rock N Roll Gold. Check out a review of lubes here for more info- https://www.scribd.com/doc/262044061/Velo-Friction-Facts-Chain-Lube-Efficiency-Tests --Mike Jacoubowsky, Partner, Chain Reaction Bicycles
$8.99
- Premium white grease - Great for bearings and overhauls
$22.99
Properly install your Ritchey carbon bars and stem without fear of over-torquing with their Torkey. This torque key uses an M4 bit and comes in 2 versions. The 5nm is the maximum recommended torque for Ritchey carbon bars and WCS stems, and the 4nm is for their Break Away frames.
$39.99
Position your smartphone at the perfect point for easy viewing and aerodynamics while riding with the help of the Quad Lock Out Front Mount. Featuring a strong dual-stage lock you can ride with confidence over bumps and jumps knowing that your phone isn't going anywhere your bike isn't. - Handlebar mount only, no phone case included - Compatible with handlebars 31.8mm, 25.4mm, and 22.2mm diameter - Can also be rotated for over stem mounting - Anodized aluminum mounting arm - Compatible with all Quad Lock cases and universal adapters
$15.99 - $16.99
Bicycle frame top-tube mounted storage pack mounts behind the stem. Nylon construction with mesh flap cover. Padded sides help maintain shape no matter the contents. Available in two size options. TECH SPECS - Size: Small: 75mm x 40mm x 105mm (220cm3) or Large: 150mm x 50mm x 90mm (386cm3) - Color: Red, Grey - Weight: Small: 15g, Large: 30g
$3.99
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running.
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
$11.99
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
$4.99
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.
$25.99
The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves
$124.99
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
$19.99
Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$55.99
Applications: - Center Kickstand - Push spring movement - Aluminium-die cast GD-AlSi9Cu3 Delivery: - incl. screw and washer - Optional: plate - Kickstand Shoe pair optional Material: - Powder-coated black/metallic silver - Pin steel hardened, galvanized - Screw M10x55 - Washer galvanized F6 Specifications: - Support 58x31x66 - Strut length L1 Modell S 290/26" - Strut length L1 Modell L 320/28" - max. Strut length 28" - Weight Modell L 542g - max. Load 25kg
$19.99
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
$13.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
$17.99
- Prevents rust, repels water - Extra heavy duty, nothing finer - Has achieved the Premium lubricant classification by all major bearing manufacturers worldwide
$19.99
- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
$16.95
Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.
$15.99
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$12.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$23.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
$30.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting