Accessories

This all-in-one spoke wrench is great as an emergency tool for bike tourers, traveling mechanics, or anyone that is going to see a variety of wheels over the course of their work. It features the 6 popular spoke nipple sizes: 3.3 mm, 3.45 mm, 3.7 mm, 3.96 mm, 4.4 mm and 5mm. It's made of drop forged steel, smashed into shape under tons of pressure before the nipple wrenches are machined to perfect size. That means it'll outlast your bike.

The tool features an 8mm hex in the middle of it for those really stuck caps

Compatible with our Professional Chain Tool and the new Master Chain Tool

- For unscrewing and tightening of front chain ring nuts - The dimension of the hexagonal key opening is SW10 - Material: premium flex plus carbon steel

The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.

Material: premium chrome vanadium steel

Two in one! Or six in three! We have three configurations of our double-sided spoke wrench to pick from. Similar in form to a traditional combination wrench, these spoke wrenches are great for the less common sizes you might run in to and allow you to be prepared while taking a minimum of space in your toolbox or work bench.

Unior, Freewheel remover Suntour®, Removal Tool, For Suntour

- Blade chrome plated, black anodised tip - Handle – polypropylene

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

Unior, Freewheel removal tool, Removal Tool, Compatible with Shimano, SRAM, Sachs, Sun Race Use with ½” wrench

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Freshen things up a bit by replacing those worn out clamp covers

Material: premium chrome vanadium steel

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. Tool is bent 30° for easier access to the caliper

- Designed to fit any 1/2" drive socket - Pro Socket Handle offers enough length (250mm tip-to-tail) for good leverage while still being compact enough to carry with you in your tool roll or tool case - Chrome-vanadium steel for high strength and chrome plated it for corrosion prevention - Spring-loaded ball bearing keeps whatever tool you're using from falling off

Features ball-end hex wrenches which are specially useful for working under angle

Three most popular TORX sizes: T10, T15 and T25mm

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

The freewheel remover is used for removing an assembling Campagnolo® freewheels. Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

Works on all chains from 5 to 11 speeds

Four sided spoke nipple engagement means fewer rounded off nipples. Offered in two sizes: 3.3mm and 3.45mm to fit most common spoke nipples, the 1630/2P spoke wrench has a plastic dipped handle for comfort and ease of use.

Unior Fork Seal Driver

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

Unior, Cartridge BB tool 20 tooth, Bottom Bracket Tool, Cartridge For: Shimano®, ISIS® Material: premium flex plus carbon steel

A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

The head set cup remover makes removal of cups 1-1/4" and 1-1/2" from the frame quick and easy Suitable for removing PressFit 30 (PF30) bottom bracket cups. PF30 bottom bracket cups are pressed into the frame the same way as the head tube cups and have the same internal diameter.

Unior, Bracket Socket 16 Notch, Bottom Bracket Tool, Hollowtech II Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BB9000, Bottom Bracket Tool, BB-9000 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BBR60, Bottom Bracket Tool, BBR60 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BSA30, Bottom Bracket Tool, BSA30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Modern replacement of the traditional chain whip Pins on the tool engage with the smallest sprocket on the cassette and hold it in place, while the opening in the middle allows for easy access to the cassette lockring

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

- Quickly and accurately determine the wear and stretch of any chain

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

For removing hub end caps while servicing the hubs or converting them to different standards Thanks to the expanding mechanism, which grabs the hub cap evenly from the inside, even the most stubborn hub end caps are easy to pull-off. Compared with the traditional way of removing hub end caps, this tool won´t damage cups or hub.

Used for holding brake and derailleur steel cables and pulling them out of the housing The safety lock is activated with a thumb push. The lock is automatically released by squeezing handles together.

Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets.

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- 3/32" chain whip

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool

Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal threads and is available in set (left and right).

Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

Unior, Bracket Socket T47, Bottom Bracket Tool, T47, PF30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm

Compatible with chains from 6–12-speeds. Including: SRAM AXS flat top chain, Campagnolo 11- and 12-speed chain peening, and most single speed 1/8'' chains Includes: Long and short derailleur chain support, dedicated SRAM AXS chain support, Campagnolo chain pin blocker, replacement chain pin

For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" Enables fast and precise determination of steering tube length desired after the cut

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions