Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Electronics

Zipp QuickView Road Low Computer Mount
$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Wahoo Aerobar Mount
$14.99
Wahoo's Aerobar Mount adds the ability to securely mount your Wahoo Bike Case (sold separately) to your aero bars. It works with any of Wahoo's line of bike cases.
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Trek Madone SLR Blendr Duo Base
$19.99
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
Trek Madone SLR Blendr Mono Base
$19.99
Allows use of one Blendr mount on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look
Topeak Omni RideCase
$39.99
The name says it all… It holds tight and works with almost every smartphone having a 4.5” to 5.5” screen with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included strap mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing Included mount compatible with Topeak RideCase & PanoComp X - Mount: Included strap mount for installation on handlebar or stem - Weight: 26 grams (Case) - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)
Topeak Omni RideCase DX
$49.99
The DX version of the Omni RideCase holds tight and works with almost every smartphone having a 4.5” to 5.5” screen, with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included RideCase Mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing - Included mounts compatible with Topeak RideCase & PanoComp X - Mount: Included mounts for installation on handlebar, stem or stem cap - Weight: 26 grams - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)
Topeak RideCase
$59.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap
Topeak RideCase w/Mount (iPhone 6 and 7 Plus)
$59.99
Works with iPhone 6 Plus / 6s Plus / 7 Plus / 8 Plus QuickClick Clip in your iPhone to use as a cycling computer with apps, including the Topeak Panobike app, use it to navigate as a GPS device, listen to music, and much more while riding. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. - Material: Engineering grade plastic frame with composite fiber base plate / Machined aluminum - Added Features: Integrated flipstand for landscape or portrait viewing Angle adjustable rotates for landscape or portrait viewing Included mounts compatible with Topeak PanoComputer - Size: 16.1 x 8.1 x 1.6 cm / 6.3” x 3.2” x 0.6” - Weight: 32 grams
Topeak RideCase w/Mount (iPhone 6 and 7)
$59.99
Works with iPhone 6/6s/7/8. Clip in your iPhone to use as a cycling computer with apps, including the Topeak Panobike app, use it to navigate as a GPS device, listen to music, and much more while riding. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. - Material: Engineering grade plastic frame with composite fiber base plate / Machined aluminum - Added Features: Integrated flipstand for landscape or portrait viewing/Angle adjustable rotates for landscape or portrait viewing/Included mounts compatible with Topeak PanoComputer - Mount: Included mounts for installation on handlebar, stem or stem cap - Size: 14.1 x 7 x 1.6 cm / 5.6” x 2.8” x 0.6” - Weight: 27 grams
Topeak Weatherproof RideCase w/Mount (iPhone 6 and 6 Plus)
$89.95
Topeak designed their Weatherproof RideCase to provide the ultimate protection for your iPhone 6 or 6 Plus against water and dirt. The Weatherproof shield allows touchscreen access and is Touch ID compatible in wet and dry conditions. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. Includes a RideCase mount.
Tacx Bracket for Tablets
$59.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Tacx Speed and Cadence Sensor
$74.99
This sensor measures your speed and cadence and transmits this information wirelessly via dual technology to the devices it is linked to. Because it can communicate via both channels, you can link it via Bluetooth to your smartphone and via ANT+ to your sports watch. Compatible with devices that have: - ANT+ - Bluetooth Smart* / Bluetooth 4 and higher *If you have a different Bluetooth version and you want to link the Tacx sensors to your smartphone or tablet, you can use a receiver developed specially for that purpose. For an Apple (iPhone) device, use the Wahoo ANT+ dongle. For devices with a micro USB port, use the Tacx ANT+ Dongle micro USB.
Tacx Tablet Holder Assembly Kit
$11.99
The Tablet Holder Assembly Kit allows fitting for various tablets to use with an at-home trainer.
Tacx USB ANT+ Antenna
$69.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Stages Cycling Dash SDL1 Head Unit
$399.99
One third of the Stages Ecosystem, Stages Dash approaches the concept of cycling data differently by putting a premium on the metrics that help you meet your goals. Stages Dash ensures you will improve your performance with power by answering the question: I have a power meter, now what do I do next? Dash is the world’s most customizable head unit. Choice can be overwhelming, though, so we’ve readied Dash to go out of the box with pre-populated Activity Profiles to help you train with power, heart rate and even RPE. Stages Dash will tell you how to get better. With wirelessly synced workouts, on-screen explanations and automated on-the-bike prompts, riding Dash means you’ll never have to stick post-it notes to your top tube again. On the road or trail Stages Dash delivers all of your riding data to your fingertips through a high-contrast, high-resolution display. Faster learning means faster riding. Once a ride is over the unique Stages Ride file allows for quick workout analysis including a visual overlay of the prescribed workout and your actual ride data—Stages Link required*. When using Stages Link, the system will alert you to changes in fitness (e.g., Threshold Power or Threshold Heart Rate) to keep you on top of your performance. *Basic Stages Link management and analytic software are included gratis, with the option to upgrade to a powerful full-access version that offers deep yet simple to understand analytics plus access to training plans and the revolutionary Link training plan builder. - 2.7-inch LCD display with 240X400 resolution, and anti-glare coating. - Fully weatherproof with a IXP7 water resistance rating - Aluminum chassis and mount with ability to reorient to landscape and portrait views - 25-30 hour battery run time with micro-USB charging - ANT+ and Bluetooth data sensor compatibility - Wired or wireless data transfer to Stages Link - Works seamlessly with 3rd-party power meters and data analysis sites - Push notification for phone alert - GPS and GLONASS satellite navigation integration - Barometric Altimeter - Machined aluminum Out-Front mount for 31.8mm bars - Dash soft case - Micro USB cable - Dash leash - Quick Start guide - Lifetime access to Stages Link's Dash manager services, including push-pull data brokering - Bluetooth: Power, heart rate, speed, cadence - ANT+: Power, heart rate, speed, cadence - Phone: Android and iPhone
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$121.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano BT-R1A External Di2 Battery
$77.99
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano Short Battery Mount External/Internal Wiring
$118.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Saris ANT+ USB Adapter for PC
$39.99
Connect your PC to CycleOps VirtualTraining.
Saris BLE USB Adapter for PC
$29.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
SRAM QuickView Adaptor
$4.99
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM QuickView Computer Mount (MTB)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
SRAM QuickView Computer Mount (Road)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
SRAM RED AXS Power Meter Spider
$599.00
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
SRAM RED AXS Power Meter Upgrade Kit
$819.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
SRAM RED AXS Quarq Road Powermeter DUB
$1,200.00
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
SRAM RED Quarq Power Meter Crankset
$1,079.00
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
Page 1 of 9 Next page