Parts & Accessories

$49.99
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual

$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz

$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

$19.99
Helmet mount for all systems that use the slider mounting clip
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems

$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts.
- Fits standard and aero seatposts
System Compatibility:
- Sentinel
- Solas
- Sabre
- CherryBomb

$9.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights.
SPEC: 700 mAh, 3.6V.

$6.00
Replacement Part – TST Tail Light Saddle Rail Mount
Allows mounting of tail light direct to saddle rails.
Compatible With:
TST-70
TST-100
TST-150
TBT-50R

$6.00
Replacement Part – Top Bar Headlight Bracket
- Works with flat top & round handle-bars
- 3 strap sizes allow fitting from 20mm to over 100mm
- Adjusts to fit aero & round seat posts & handlebars
- For lights up to 120 grams in weight
- Fits all Serfas headlights EXCEPT: USL-200, USL-250, USL-450, USL-500

$6.00
Brighten up your style, increase your visibility, and make those nighttime rides more fun with the Serfas SPK Spoke Lights! Available in FIVE fun LED light colors: White, Red, Green, Multicolored, and Blue. The SPK Spoke Light is quick and easy to mount and sure to stay safely secured while traveling across any terrain, and with built-in water resistance the SPK ensures a splash or two won't send you home in the dark. Add one, or even twenty, to your bike today and be the coolest cat on the block!
- Water Resistant
- Fast & Easy Installation / Removal
- Solid Modes: Up To 30 Hours
- Flash Modes: Fast – Up To 35 Hours / Slow – Up to 55 Hours
- Weight: 20 Grams
- Size: 12.8cm x 4.4cm
- Battery: 1 x Lithium CR2032

$8.99
Key features:
- Replacement InnerGlo LED light strips for select Bontrager Town clothing
- Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants
- Sold individually

$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$4.99
Product details
- Perfect for mounting compatible Flare taillights to rear rack
- Includes a bolt and star washer for extra security
- Easiest to install with light installed for better leverage

$6.00
Replacement Part – GoPro Camera Bracket
- Compatible With All Serfas Headlights EXCEPT USL-200, USL-250, USL-450 and USL-500
- GoPro compatible
- Allows use of action camera on helmet or bar

$20.00 - $30.00
Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.

$1.99
Key Features
- Perfect for mounting compatible Flare taillights to rear rack
- Includes a bolt and star washer for extra security
- Easiest to install with light installed for better leverage

$14.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series

$29.99
The Explorer headband adjusts to various head shapes and sizes.
System Compatibility:
- Explorer 350
- Pro Series
- HID Series
- Classic Plus & Seclect
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems

$9.99
The bolt-on headlight bracket mounts to your fork crown and provides a unique mounting option that centers a headlight just above the front wheel. It comes with a platform that is specifically designed to work with most Planet Bike lights. This platform can be removed quickly to create a 26.2mm diameter universal mount that accommodates most clamp and stretch strap mounting systems.
- Planet Bike specific platform works with most Planet Bike headlights
- Converts to a 26.2mm universal mount to fit most headlight mounting systems
- Bracket bolts through brake mount on fork crown (60mm bolt, washer, and nut included)
- Compatible with all Blaze, Beamer, Spok, Amigo and Spot headlights
- Weight: 72 grams

$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

$10.00
Replacement Part – Oversized Handlebar Bracket (35mm)
- Reinforced internals take more abuse
- Fits oversized 35mm mtb bars
- No tools needed
- Included with USL-1100 & USL-1500
- Weight: 40 grams
- Works for all Serfas headlights except for: SL-200, SL-30WP, & SL-40WP

$15.00
Replacement Part – Headlight Bracket
- Fits all Serfas headlights
- Long silicone strap allows endless mounting options
- No tools needed
- Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R

$6.00
Replacement Part – Universal Tail Light Bracket
- Fits all current tail lights with removable bracket except UTL-4bk
- Long silicone strap allows endless mounting options
- No tools needed
- Not compatible with: TST-70, TST-100, TST-150 & TBT-50R

$2.99
Key features
- Reflector mount for first and second generation Speed Concept seatposts
- To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)

$15.99
Where your gaze goes, your light follows
Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights.
- Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash
Page 1 of 3
Next page