Filter By:
- Parts & Accessories (18)
- CO2 Inflators (19)
- Floor Pumps (12)
- Mini Pumps (18)
- Shock Pumps (2)
- Show More Brands
- Show Fewer Brands
Pumps/Inflation

$3.99
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running.

$4.95
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

$4.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

$7.99
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

$8.99
Lightweight plugs for tubeless tire punctures.
When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

$8.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

$8.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

$8.99
- Solution for mounting pumps and C02 inflators on frames or seatpost
- Soft rubber block and Velcro loops hold pumps tightly

$11.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

$13.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

$14.99
Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.

$17.99 - $19.99
CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge.
- Weight: 26g
- Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components
- CNC machined aluminum parts for precise and durable construction
- Press on/off valve operation functions like a trigger, providing easy and precise inflation
- Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves

$19.00
The Fatty Object CO2 inflator fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on.
- Precision machined alloy parts
- For use with both Presta and Schrader valves

$19.99
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power!
- Compact and nearly indestructible
- Easy to use and fully controllable
- Patented twist-to-inflate technology
- Press on to both Schrader and Presta valves
- Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges
Product includes:
(1) Microflate Nano inflator head
(1) threaded 20 gram CO2 cartridge

$19.99
20g CO2 cartridges contain a mid-sized charge suitable for higher volume gravel tires or similar (Exp. 700c x 40mm / 29" x 1.5").

$19.99
Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

$20.99 - $26.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.

$20.99
Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle.
- Presta and Schrader valve compatible
- Maximum pressure: 100 psi / 7 bars
- Weight: 3.7 ounces (105g)
- Length: 7 7/8" (200mm)
- Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

$21.99
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology.
- Easy and controllable inflation
- Push-to-inflate technology
- Auto detect head for instant Presta or Schrader valve attachment
- Lightweight, compact design
- Weight: 26 grams
Includes:
(1) HammerHead inflator
(1) threaded 20 gram CO2 cartridge

$22.99
Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation.
- Presta- and Schrader-valve compatible
- Includes mounting hardware to securely attach to water bottle bosses or under bottle cage
- Maximum pressure 90 PSI/6bars
- Approximate weight 4.6oz/130 grams
- 10.5 inches in length (265mm)

$24.99
Similar to an accurate chain checker, this tool is designed to give you a quantitative measurement on exactly how worn your Bontrager tires are. Use this highly accurate gauge with the chart in the product image, which shows Bontrager's minimum recommended tread depth.
- Dial gauge designed to precisely measure Bontrager tire wear
- Use in conjunction with the chart in product image to know minimum tread depth
- The tire should be measured on the center knobs with multiple points taken
- The perfect tool to prove how worn a tire is and thus replace at the proper interval

$24.99
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation!
• Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately)
• All metal aluminum design
• Easy to use and fully controllable
• Push-to-Inflate technology
• Works with both Presta and Schrader valves
• Includes one 16 gram and one 20 gram threaded CO2 cartridge
• Weight: 16 grams

$24.99
Comfortable, durable and most of all reliable, the Ultraflate is Genuine Innovations' most tried and true cupped inflator. Its reinforced glass nylon construction and brass internals means it can take the strain of everyday use and still maintain precision inflation performance.
- Trigger-controlled technology for fast, easy and controllable CO2 inflation
- Built-in "trigger lock" to prevent accidental discharge
- Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges
- Works with both Presta and Schrader valves
- Store a non-threaded 20 gram CO2 cartridge in the cup
Includes
(1) Ultraflate inflator head
(1) non-threaded 20 gram CO2 cartridge

$25.99
- For use with Bontrager CO2 cartridges
- Regulator design provides safe, controlled operation
- Reusable cartridge insulator keeps hands protected while inflating
- Compact and lightweight design is easy to store for any ride
- Spring-loaded mechanism regulates airflow for both Presta and Schrader valves

$25.99
Show flats no fear with Bontrager's Air Support pump. Built for the lower-volume tires on your commuter, cruiser or town bike, but can handle road and mountain tires, the Air Support is great for topping off your pressures or fixing that unfortunate flat. The auto-select head uses a fold-out lever to lock securely to Schrader or Presta valves for quick and easy inflation up to 80 psi.

$25.99
Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges.
- CNC-machined aluminum dispenser with brass internals
- CNC control knob twists for easy and controlled inflation
- Twin Slip Chuck head presses on to Presta and Schrader valves
- Neoprene sleeve insulates hand from cold during discharge
- Compatible with threaded CO2 cartridges (sold separately)
Page 1 of 3
Next page