Tools/Maintenance

Unior, Freewheel remover Suntour®, Removal Tool, For Suntour

- Blade chrome plated, black anodised tip - Handle – polypropylene

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Freshen things up a bit by replacing those worn out clamp covers

Material: premium chrome vanadium steel

- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. Tool is bent 30° for easier access to the caliper

- Designed to fit any 1/2" drive socket - Pro Socket Handle offers enough length (250mm tip-to-tail) for good leverage while still being compact enough to carry with you in your tool roll or tool case - Chrome-vanadium steel for high strength and chrome plated it for corrosion prevention - Spring-loaded ball bearing keeps whatever tool you're using from falling off

Features ball-end hex wrenches which are specially useful for working under angle

Three most popular TORX sizes: T10, T15 and T25mm

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

The freewheel remover is used for removing an assembling Campagnolo® freewheels. Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

Works on all chains from 5 to 11 speeds

Unior Fork Seal Driver

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

What's quicker than a multitool, has a lightweight and ergonomic handle, and comes in five different varieties? Our three-way wrenches. Offered in a total of 5 different configurations for every purpose you can imagine: three hex versions, one torx, and one 3-way socket wrench. - The 3-way socket wrench uses standard 1/4" sockets so you can customize it to fit your needs. Check out our 187/2HX and 187/2TX hex and Torx bits. - A 3-way Torx includes T10, T15, and T25 wrenches - Two straight-tip hex options: a 2, 2.5, and 3mm as well as a 4, 5, and 6mm - One ball-end hex option in 4, 5, and 6mm.

The head set cup remover makes removal of cups 1-1/4" and 1-1/2" from the frame quick and easy Suitable for removing PressFit 30 (PF30) bottom bracket cups. PF30 bottom bracket cups are pressed into the frame the same way as the head tube cups and have the same internal diameter.

- Material: premium flex plus carbon steel - The 2.3 and 2.8 mm pins are interchangeable, the distance between them is adjustable. The biggest difference between the pins is 50 mm open and 10 mm closed. - Surface finish: chrome plated according to ISO 1456:2009, double plastic dipped handles, entirely hardened and tempered

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

- With the Velcro strap the tool can be mounted to any front fork and rear seat stay of the frame - The indicator is then used normally as on other truing stands. The tool can be also used for truing rotors - Light and small and easily fits in any backpack