Tools/Maintenance

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

Used for holding brake and derailleur steel cables and pulling them out of the housing The safety lock is activated with a thumb push. The lock is automatically released by squeezing handles together.

Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets.

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- 3/32" chain whip

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool

Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal threads and is available in set (left and right).

Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

Unior, Bracket Socket T47, Bottom Bracket Tool, T47, PF30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm

Compatible with chains from 6–12-speeds. Including: SRAM AXS flat top chain, Campagnolo 11- and 12-speed chain peening, and most single speed 1/8'' chains Includes: Long and short derailleur chain support, dedicated SRAM AXS chain support, Campagnolo chain pin blocker, replacement chain pin

For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" Enables fast and precise determination of steering tube length desired after the cut

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

This tool accurately presses headset cups 1”, 1-1/8”, 1-1/4 ” and 1-1/2” into head tubes. In addition it has a longer spindle for BMX headsets with larger tubing. This precision made tool enables work without damage.

These taps are designed to work with our 1697 BSA BB tap set or our 1698 Italian BB tap set. If you have one or the other and need compatibility with the other type of thread, simply buy these taps and the corresponding tap holders and you'll be on your way.

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Includes drifts for most common bearing sizes - Organized storage in a plastic case with our laser-cut SOS foam tray - Combine with our Bearing Puller for the best bearing service kit in the business

Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out.

Recommended shop supplies If you sell Bosch equipped e-bikes, you want this tool. Allows you to suspend the Bosch motor from the frame after removal without disconnecting all of the wiring. Product details - Sturdy steel construction - Designed specifically for Bosch motors

Genuine Replacement Parts Get your bike back on the trail with the brake parts you need. Genuine Tektro replacement brake parts. - Tektro specific mineral oil - Only for use on Tektro brakes

Dial in your dream geometry Adjust head tube angle one degree slacker or steeper on compatible Trek mountain bikes with angle-adjust cups and this tool. Product details - Refer to Service Manual for assembly instructions and service - Includes upper and lower gauge - 8mm metric wrench needed for alignment sold separately

Protect your investment by using the right tool. Essential for correct installation. PRODUCT DETAILS - Used for tamper resistant fasteners - 1/4" hexagon shank

Widely versatile bit for home and shop use. GENUINE REPLACEMENT PARTS The right tool for the right job. PRODUCT DETAILS - Anti-tampering bit is used for various Powerfly and B-Cycle fasteners - T25 Tor/ head

Everything you need Be prepared for roadside adjustments and minor repairs with the Trek Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smooth. Product details - 2, 2.5, 3, 4, 5, 6, and 8 hex wrenches along with Phillips and flat-head screwdrivers, and T25 - Alloy sides for a sleek lightweight design

Tools designed for use on your bike When it's time to refresh your trusty bike, Trek Genuine Replacement Parts and tools have you covered. Product details - Rotary tool attachment for removing nutserts from frames - Refer to manual for complete instructions for use

Protect your investment by using the right tool. A specialty tool that is difficult to find. Details: - For use with Torx Plus IPR fasteners with security pin - 5-Lobe interface - 1/4" drive

Trek proprietary suspension service tools. - For use with 12mm x 21mm rocker pivot bearings - Complete solution for removing bearings installed over bearing spacer pivots

Get back on the road with genuine replacement parts. For proper assembly. Details: - Works with TQ connectors - Sold individually