Tools

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red

Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA

- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805

- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor

Another indispensable tool for the professional bike shop. The hub bearing press pro kit works with bearings that have an i. D. Of 10mm or smaller (most front hub sealed bearing fall in this range). Installs sealed bearing sizes : - 6801 - 6802 - 6803 - 6900 - 6901 - R6 - 688 - 608 - 609 All parts are laser etched for easy identification. Formally press-2 includes: - 608 open bore 5mm x 2 - 608 over axel 5mm x 2 - 609 open bore 5mm x 2 - 609 over axel 5mm x 2 - 688 open bore 5mm x 2 - 688 over axel 5mm x 2 - 6801 open bore 5mm x 2 - 6801 over axel 5mm x 2 - 6802 open bore 5mm x 2 - 6802 over axel 5mm x 2 - 6803 open bore 5mm x 2 - 6803 over axel 5mm x 2 - 6900 open bore 5mm x 2 - 6900 over axel 5mm x 2 - 6901 open bore 5mm x 2 - 6901 over axel 5mm x 2 - R6 over axel 5mm x 2 - Rear QR skewer All parts are laser etched for easy identification.

- Advance bottom bracket bearing extractor set - (1) BE-22mm, (1) BE-24mm, (1) BE-29mm, (1) BE-30mm, (1) Bearing Pusher, (1) 39mm sleeve, (1) 42mm sleeve, (1) 44mm sleeve, (1) receiver cup

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. - machined aluminum handle and drifts - red anodized drifts and handles - zinc-plated 1/2" diameter threaded rod - long threaded rod works with long head tubes up to 250mm includes - 1 head tube drift includes - 1 headset cup drift - 1 adjustable press stop - 1 threaded handle includes on 1/2"-13x17" unc threaded rod

- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

Another indispensable tool for the professional bike shop, the Wheels Manufacturing Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range). It features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer. - Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609 - All parts are laser etched for easy identification

Material: premium chrome vanadium steel

- Blade chrome plated, black anodised tip - Handle – polypropylene

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

Material: premium chrome vanadium steel

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

- The wrench is used for tightening and unscrewing screws with 4, 5, and 6mm hex-shaped nut

Features ball-end hex wrenches which are specially useful for working under angle

Three most popular TORX sizes: T10, T15 and T25mm

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.