Tools

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems.

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box

The Range Click Torque Wrench replaces its predecessor with solid, tactile click-torque function, a wide measurement range, user-friendly ergonomics, and shop-quality fit and finish. With 13, high precision S2 tool steel bits and a protective, compact, and weather resistant TPU fold up style case, this tool is a perfect companion for safe, secure repairs in the shop or on the go. - Torque wrench handle features magnetic, 72-tooth ratchet, dual-sided torque setting window, dual-direction torque measurement compatible for right- and left-hand threaded bolts - 13 bits included: 2, 2.5, 3, 4, 5, 6, 8mm hex, T10, T25, T30 Torx, and 4, 5mm, Torx T25 (extended 50mm length) - Torque measurement from 2-14Nm, adjustable in 0.17Nm increments, scale displayed in 1Nm increments - Dual-sided window display scale allows easier ambidextrous usability and permits larger, easier to read torque setting numbers - Accurate within +/- 4% for 4,000 cycles - Plastic-free head and handle. PFAS-free tool roll. Plastic-free, 80% recycled paperboard packaging

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 36-notch tool fittings, including Praxis Works M35 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 36-notch bottom bracket tool fittings with a major diameter of 51–53 mm and a minor diameter of 50.7 mm, including: - Box® Two Oversized M35 - Praxis Works® M35

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

Product details - Professional-grade tool developed in partnership with Knipex and made to last - Parallel jaws are significantly better alternative to traditional adjustable wrenches - Can replace entire sets of imperial and metric wrenches - 10:1 gripping power ensures no slipping or rounding of fasteners - Capacity of up to 1-3/8" and 35mm fasteners - Light enough to travel with, durable enough for daily use

Product details - A professional-grade tool developed in partnership with Knipex and made to last - 7.5"/190mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Features an integrated class-leading crimper for cable end caps and housing ferrules

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes - Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes

Shock Bushing Press Kit An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. - Fits 12mm and 1/2" bushings. - Machined aluminum - Anodized Red

A complete tool set to work on both Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems (each sold separately). The CBP-8 includes a beefed-up bearing and crank puller and all the fittings necessary to remove and install both systems. - Bearing Puller That Fits Both Power Torque And Ultra-Torque - Crank Puller For Power Torque - Bearing Setter For Both Power Torque And Ultra-Torque - Removal Adaptor For Power Torque Crank Bearings - Removal Protection Pads For Use With Carbon Cranks - Removal Protection Adaptor For Use With Aluminum Crank Arms - Crank Removal Extension Plug For Power Torque

This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip

Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

This tool is used for the alignment of the rear triangle and dropouts.

Bontrager Pro Ratchet Multi-Tool delivers professional quality in a small, light, and portable package. A 72-tooth micro-ratchet and Swiss S2 steel bits provide unmatched precision for adjustments in the workshop or on the road. The modular design offers clever configurations that make access to any bolt a breeze, and even includes an integrated torque setting. And it all wraps up in a classy case that keeps everything in its place. - Precision ratchet with convertible magnetic extension - 12 function - 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, T10, T20, T25, #2 Phillips, steel bit extender - Ti-Torque beam for measuring 2-8Nm with live readout - Duck waxed canvas carrying case measuring 120mm x 70mm x 30mm

Unior’s tensiometer easily measures the spoke tension on any kind of spoke. The tool arrives ready to use in a protected carrying case and includes a reference rod so you can calibrate the tool in your own shop. To use, simply press the handle, position the spoke between the two pins and release the handle. The properly designed gauge is easy to read. The measured value is then cross referenced in the spoke information table, from where you read the actual tension based upon the spoke specification. The printed table is included with the tool, together with more precise usage instructions. An additional included feature on the tool is a spoke thickness gauge, which helps to identify which line in the conversion table you should be referencing. Simply insert the spoke in one of the upper openings and read the spoke thickness.

For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" Enables fast and precise determination of steering tube length desired after the cut

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes - Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes

Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups.

- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes - Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Perform frame repairs safely with this rivnut tool. When it's time to refresh your trusty bike, Trek torque tools have you covered. PRODUCT DETAILS - Torque limiting tool to safely install rivnuts in Trek frames - Designed for use with M3, M4, and M5 rivnuts - Refer to Service Manual for assembly instructions and service

- Versatile digital scales built to accurately weigh bikes, frames and components - DS-1 hanging scale designed to be clamped into a repair stand or hung from the silicone coated hook - DS-1 measures in pounds and kilograms to the tenth position up to 25kg (55lb) - DS-2 tabletop scale is perfect for weighing small parts and components and includes a tare function to exclude weight of container - DS-2 easily switches between grams and ounces and has a 3000g (106oz) capacity

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm