1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Thru-axle adapter for the Kuat TRIO rack.
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers
Piston Fender Strap Kit
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)
Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).
$49.00 - $59.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. - Electroplated plus powdercoat for best rust resistance - Welded steel construction - Includes lock, two keys & wrench for installation - Fits 2" Hitches only - Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch - Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Fat Tire holder for T2 PRO X
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key
Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier. - Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers - 250 lbs weight limit carrying capacity - Provides a 2.25" drop for improved tailgate/rear door clearance - Bolt fixation to vehicle - Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat. Product Features: - Extends rack 8 inches from receiver - Only for 2-inch hitch receivers - Uses RockyMounts 3-axis anti wobble system - Reduces vehicle hitch capacity by 50% - Ideal for vehicles with spare tires, recessed hitches or van doors - Includes locking hitch pin with premium lock pod, can be keyed alike - 10lbs
The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only
Protect your rides
Expand the capacity of your HighNoon FC or HighNoon FC Solo with this Add-On. - Compatible with 2" HighNoon FC to expand carrying capacity to 3 bikes, or HighNoon FC Solo to expand capacity to 2 bikes. - Lowers max weight capacity from 60 lbs per bike to 45 lbs per tray - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 34" to 52" - Rack weight 14lbs (shipping weight 20lbs) - NOT COMPATIBLE with BackStage, MonoRail, SplitRail, GuideRail (Only fits HighNoon FC 2" or Solo)
Page 1 of 2 Next page