Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Wolf Tooth 94mm BCD For 5-Bolt Chainrings
$74.99
This 94 BCD 5 bolt ring will serve all your Vintage crankset and Surly crankset needs! - 4 of the holes are threaded and 1 is a normal through bolt hole (done for Surly compatibility). Use a stock 10mm chainring bolt for the fifth, hidden arm. - These rings fit any 94 BCD 5 bolt crankset - For Plus size bike applications with the Surly OD crankset, e.g. Instigator and Krampus, you will need to use the stock spacers (Spacer Kit QBP Part number CR8609) that came with your 1x setup. You will also need some 16mm bolts from problem solvers. - This ring will work with your vintage 94 BCD 5-bolt cranksets!! - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes.
Wolf Tooth Roadlink
$29.99
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Roadlink Direct Mount
$39.99
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Set of 4 Chainring Bolts+Nuts For 1x
$24.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wheels Manufacturing 7sp Cassette/8sp Body Spacer
$20.95
- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body
Wheels Manufacturing Aluminum Brake Cable Housing Ferrules
$40.00
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables
Wheels Manufacturing Aluminum Headset Spacer
$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing BB86/92 ABEC-3 Bottom Bracket
$118.65
Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g
Wheels Manufacturing Ball Bearing Retainer
$10.45 - $20.48
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Brass Brake Cable Housing Ferrules
$28.00
- Precision-machined brass brake cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables - 50-count bottle
Wheels Manufacturing Cable Crimps: Bottle of 250
$34.60
- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle
Wheels Manufacturing Chainstay Protector - 10-Pack
$57.75
Wheels Manufacturing Clear Chainstay Protectors keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Pack of 10
Wheels Manufacturing Derailleur Hanger 100
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6x10 Flat Head Screw
Wheels Manufacturing Derailleur Hanger 11
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 131
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 146
$26.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.
Wheels Manufacturing Derailleur Hanger 168
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw
Wheels Manufacturing Derailleur Hanger 172
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 176
$26.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Derailleur Hanger 20
$27.00
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances using the finest US-made aerospace quality aluminum. - CNC-machined 6061 aluminum - Black anodized finish - Mounting hardware included
Wheels Manufacturing Derailleur Hanger 4
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
Wheels Manufacturing Derailleur Hanger 40
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 6
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 65
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Wheels Manufacturing Grade 300 Loose Ball Bearings
$22.05
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Wahoo Fitness POWERLINK ZERO: Dual-Sided Power Pedal System
$999.99
BREAKTHROUGH POWER Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level. A POWERFUL COMBINATION POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage. BETTER YOUR BEST Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains. LASTING POWER POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long. In the box - Left and Right Power Pedals - Washer (x2) - Cleat Assembly - Screw Packet - Charging Cable and Clips - Quick Start Guide - Important Product Information Guide Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"
Wahoo Fitness Speedplay Comp Pedals
$149.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level. - Weight: 224g (per pedal pair) - Spindle Material: Chromoly - Spindle Length: 53mm - Float: 5 to 15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed
Wahoo Fitness Speedplay Zero Pedals
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed
Velox Tressostar Cloth Handlebar Tape
$6.95 - $69.50
- Adhesive backed, 100% cotton, braided, reinforced edges
VP Components VP Grind Pedals
$19.99
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings. - 380 grams - 9/16" axles
TruVativ Giga Pipe Team SL Bottom Bracket
$49.99
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
TruVativ Trushift Alloy Chainring
$27.99 - $43.99
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum
Trek ABP Classic Derailleur Hanger
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek ABP Convert 135mm Quick Release Derailleur Hanger
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 135x5mm hubs Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek ABP Convert 150mm x 12mm Derailleur Hanger
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 150x12mm and 135x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek ABP Race Derailleur Hanger
$24.99
Get back on the trail with a quality replacement hanger. - Original equipment replacement rear derailleur hangers - Attachment hardware is sold separately Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek Hardtail Convert Rear Derailleur Hanger
$19.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 142x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
Trek Kids' MT Series Rear Derailleur Hanger
$17.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt
Trek Kids' MTB Grips
$6.99
Make sure your kid has a good grip out on the trail with Trek's Kids' MTB Grips. Their knurled design is easy to hold onto when things get bumpy. Choose the 75/125mm pair for twist-shifter compatibility.
Trek Kids' Single Speed Grip Set
$7.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes without shifters - Set of two grips Specifications - Length: 107mm - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber
Trek MTB/Hybrid Derailleur Hanger
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
Trek MTB/Tandem 2003 Rear Derailleur Hanger
$17.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt
Trek Madone Gen3 Rear Derailleur Hanger
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
Trek Road Derailleur Hangers
$17.99 - $19.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
Trek Seat Mast Cap
$159.99
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
Trek Top Fuel 29 2x Low Direct Mount Front Derailleur Nut
$19.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Front, Not applicable - Mounting location: Front - Attachment: Thru axle nut
Trek Trek Madone SLR Blendr Duo Base Kit with Hardware
$19.99
Allows use of two Blendr mounts on a Trek Madone SLR. Genuine replacement parts Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike. Product details - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Includes mounting hardware
Thomson Elite Seatpost
$99.95 - $114.95
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Thomson Seatpost Bolt Kit
$3.95
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Thomson Seatpost Clamp Set
$24.95 - $24.99
These clamp sets can be used on any of the Thomson Seatpost line (Elite, Masterpiece, & Droppers)
Thomson Seatpost Collar
$29.95 - $30.00
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Terry Butterfly Century Saddle
$189.99
Terry's longest distance, lowest profile, widest cutaway Butterfly with something extra: Poron XRD. Designed to take comfort up a notch for endurance riding, the Butterfly Century is engineered with a layer of Poron XRD shock absorbing material between the saddle’s base and foam layers. The Poron XRD reduces road shock and allows for a thinner layer of foam and a narrower overall saddle profile, without loss of rider comfort. A larger foam cutout provides greater soft tissue relief. Additionally, the Century features a thin layer of gel along the top, a wider cutaway, sculpted foam for pressure relief in key areas, and a seamless Fibra-tek cover that reduces the incidence of high cadence chafing. - Fibra-tek cover with Poron XRD shock-absorbing layer - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 152mm - Weight: 268 grams; 9.5 ounces - Rails: Ti-316
Terry Butterfly Galactic Saddle
$129.99
For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. This Butterfly Galactic was designed to take comfort up a notch, in addition to giving you a ride that's out of this world. We've engineered it with our largest cutaway, and It comes as a limited edition in two color options with reflective ink constellation screen-print on the cover. Hand made by aliens in Italy. - Dura-tek cover with constellation screen-print in reflective ink - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 260 grams; 9.3 ounces - Rails: Manganese
Terry Butterfly Ti Saddle
$164.99
For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. The Butterfly Ti has a textured leather cover that will wear beautifully over time and keep you solidly planted on the saddle. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cutaway through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with injection molded foam that's stiff enough to give you more power for pedaling. - Debossed butterfly graphic - Textured leather cover - Signature Butterfly cutaway through center of saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 248 grams; 8.7 ounces - Rails: ti-316
Terry Butterfly Women's Saddle
$219.99
The Butterfly Carbon is the lightest of the Butterflies thanks to the addition of carbon rails. It's wider in the rear than typical saddles for good support of a woman's sit bones. The Butterfly Carbon's low profile, flat top, and a complete cutaway through the center are designed to provide pressure relief and support in the right areas. Injection-molded foam is used to provide the right balance of softness and stiffness so you won't sink into the saddle the longer you ride. - Black leather with gloss butterfly graphic and patent leather rear - Signature Butterfly cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 218 grams; 7.7 ounces - Rails: lightest weight Carbon 10mm H (+/- .5mm) x 7mm W (+/- .5mm) note: check seat post for compatibility as it may require an adapter kit (available from some seat post manufacturers)
Terry Raven Saddle
$95.99
Our Raven saddle was designed using the latest in vacuum molding technology, allowing for a sleek, seam-free contact surface and clean integration with the saddle's substrate base. The benefit – no chafing, no hot spots. It has a narrow profile with dropped nose shaping in front that helps eliminate pressure and a flat rear that supports your sit bones. We've also achieved the ideal balance of foam padding with an ergonomic relief channel, making it a very comfortable option for those looking to minimize bulk. The Raven is a slightly longer saddle that gives you more fore-aft positioning range on the bike and it comes with a smooth, durable synthetic cover. - Smooth, matte black Dura-tek cover - Pressure relief channel - Drop nose design for comfort - Length x width: 265mm x 150mm - Weight: 275 grams; 9.7 ounces - Rails: Cr-mo
Terry Topo Saddle
$99.99
Our Topo mountain bike saddle for women takes everything we've learned about saddle comfort and tailors it to the specific needs of female mountain bikers. It's a sleek, low profile design with a narrower shaped, flat rear platform that aids in your climbing performance and quick rear dismounts. The center has one of our widest cutaways to increase comfort and eliminate pressure points. And what really defines Topo is the use of a durable, Fibra-tek with a debossed topographic map of Vermont's Kingdom Trails. Made by hand in Italy. - Fibra-tek cover with a debossed topographic map of Vermont's renowned Kingdom Trails - Terry's signature cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 150mm - Weight: 310 grams; 10.9 ounces - Rails: FeC alloy
TRP Alloy Rim Pads
$25.00
TRP Alloy Rim brake pads are specifically designed for aluminum rim braking surfaces. - High performance brake pads - Aluminum rim compound - Fits all TRP road brakes, InPlace cartridges, Shimano and Shimano compatible road cartridges - Color: Black - Sold in sets of 4 (2 pairs)
TRP Spyre
$119.99
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
TRP Spyre SLC
$119.99
The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
Page 1 of 25 Next page