- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Aluminum construction
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height = 9mm
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
With so many options for on-the-fly adjustments on handlebars, it’s easy to clutter this valuable space with a variety of levers. To maximize handlebar real estate, Cane Creek's DROPT cable-actuating dropper post remote was designed to couple with the OPT Climb Switch and create one clean connection to the handlebar for two remote systems. Adjustable lever positioning, cable pull options to limit lever movement, and two types of cable insertion methods make the Cane Creek dropper remote the most versatile on the market. Provided with a handlebar mount, this remote system can also be used separately from OPT for a high quality dropper remote. Features Lever: - Shifter style, left side - Adjustable Cable Pull (limits lever movement) - Adjustable lever positioning - Sealed pivot axis bearing Cable: - Universal Fasten or Butted-end Insertion Handlebar Connection Options: - Removable hinge couples with OPT - Matchmaker compatible - Standard hinged clamp mount
$24.00 - $49.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Replacement springs for Cane Creek Helm suspension forks.
Allows the lower of a 47mm IS headtube to be converted to use a standard 41mm 36x45 degree headset bearing.
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel. - Hard anodized for durability - Requires brake cable and housing for installation - Bottom mount for below bar engagement or top mount for above bar - Compatible with DBinline, DBAir IL, and DBCoil IL shocks only
$19.50 - $26.50
Mounting hardware fits a variety of Cane Creek shocks.
$49.00 - $72.00
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models.
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Page 1 of 1