Other

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Cable exit guide specific to Slash+ for routing hydraulic brake & rear derailleur. Get your cables under control. Product details First used on Slash+ Leave removable tab in place for AXS shifting Hardware not included Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Securely attaches Slash+ speed sensor to the chainstay. Trek proprietary cable management system. Product details Designed for Slash+ Fasten with M4x0.7x6mm button head screw 6.3mm inner diameter clamping area Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

- Thin, durable, wide black chainstay protector with extra-strong adhesive - Includes alcohol prep pad to clean chainstay - 8 mil thickness - 10 pack Application: Recommended application temperature: 60 - 85 degrees fahrenheit. Water may be used to aid positioning during installation. Let adhesive cure for a minimum of 20 minutes before riding. Removal: Recommended angle for removal is 30 - 60 degrees from the surface. A steamer may be used to aid removal.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

Keep your investment protected with durable armor designed specifically for your ride. Protection that's engineered to keep your ride looking good as new for years to come. Product details Trek protective armor Model-specific custom fit

Original equipment replacement parts for your ride. - For specific Bosch equipped eBikes only - Mounting hardware sold separately

Shimano Y8H298040 SM-BH59 Olive and connecting insert

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Travel Adjustment Spacers for the Resolve dropper post. The travel height of the dropper post can be reduced in 5 mm increments up to 50 mm height reduction with 10 spacers.

- Saddle clamp for straight seatpost - Diameter: 22.2mm

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Genuine replacement parts Keeps your bike looking like new. Protects your bike from the elements. - Used in place of Range Extender system - Black frame plug

Genuine replacement parts Keeps your bike looking like new. Protects your bike from the elements. - Used in place of Range Extender system - Black frame plug

Trek proprietary suspension hardware. - Trek full suspension rocker pivot suspension hardware - First used as ABP Spacer for Top Fuel 26 2009 and other ABP Race designs - Widely used as rocker link pivot spacer 2016-2022

Parts for repair and maintenance of DT Swiss hubs.

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Protection that's engineered to keep your ride looking good as new for years to come. Product details Trek protective armor Requires 2 fasteners - sold separately

Trek proprietary suspension hardware. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

Genuine replacement parts Genuine replacement parts Original Equipment specifications. Compatible with Bosch Powertube RIB batteries. - Hardware should be ordered separately

For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Original equipment replacement fender parts for your ride. - Fits front and rear fenders - Includes rubber damper

• For use with externally routed road frames

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

RockShox cable and hose guide.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Flat Mount Disc Caliper Bracket Bolts

- Replacement semi-cartridge bearings for Cane Creek 10-Series headsets - Bearing I.D. (mm): 30 mm - Bearing O.D. (mm): 41 mm - Bearing Type: Cartridge - Cartridge Bearing Angle: 36x45 - Thickness: 6.5 mm

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light and durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Keep your MTB operating smoothly with original replacement parts. Get back on the trail with original replacement frame parts. Product details First used on Slash+ Not cross compatible with Fuel EXe Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Genuine replacement parts Original Trek Chainstay bracket Get your bike back on the road with a genuine replacement bracket - Compatible with a 32T chainring - Length: 79mm - Mounting hardware not included

The same bearings found in Trek and Gary Fisher full suspension bikes. - Refer to dimensions for best compatibility - A heavy contact seal provides the best defense against the elements - Refer to Service Manual for assembly instructions and service - The same bearings used in our bike assembly for proven quality - Wheel bearings are not an approved substitute for full suspension bearings

Silver aluminum headset spacers for 1-1/8" fork steerer. 10mm thick. Inner Diameter: 28.9mm Outer Diameter: 34.4mm Thickness: 10mm Precision-machined aluminum Polished aluminum Bag of 5 spacers

- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Replacement downtube strike plate for 2012 Madone - Self adhesive

Keep your investment protected with durable armor designed specifically for your ride. Protection that's engineered to keep your ride looking good as new for years to come. Product details Not compatible with Fuel EXe Carbon Refer to Service Manual for assembly instructions and service