Filter By:
Accessories/Parts

$50.00 - $91.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp.
- Sold in pairs
- Stainless steel: 85 grams/set
- Titanium: 78 grams/set

$7.00
Zipp Speed Weaponry Valve Extender Wrench Set
- Two 4 mm and 5 mm combination wrenches
- Replacement wrenches required to properly install Zipp integrated valve extenders
- Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

$70.00
- Cold forged 304 stainless steel with rolled threads
- Lightweight 2.0mm/1.7mm/2.0mm double-butted form
- Nipples sold separately
- 172g (32 spokes @ 262mm)
- Bag of 50

$20.00
Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish.
- Spacers come in bags of 20

$20.90
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese rear hubs with 126mm spacing
- Type: Hollow Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 137mm
- 1 axle per bag

$20.90
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese rear hubs with 130mm spacing
- Type: Hollow Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 141mm
- 1 axle per bag

$19.25
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese rear hubs with 135mm spacing
- Type: Hollow Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 146mm
- 1 axle per bag

$25.30
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits Campagnolo / Italian rear hubs with 130mm spacing
- Type: Hollow Axle
- Threads: 10mm x 26tpi
- Diameter: 10mm
- Length: 141mm
- 1 axle per bag

$23.10
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs with 126mm spacing
- Type: Hollow Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 137mm
- 1 axle per bag

$23.10
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs with 130mm spacing
- Type: Hollow Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 141mm
- 1 axle per bag

$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs
- Type: Solid Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 174mm
- 1 axle per bag

$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese front hubs
- Type: Solid Axle
- Threads: 9mm x 1
- Diameter: 9mm
- Length: 155mm
- 1 axle per bag

$33.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits Campagnolo / Italian rear hubs
- Type: Solid Axle
- Threads: 10mm x 26tpi
- Diameter: 10mm
- Length: 174mm
- 1 axle per bag

$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs
- Type: Solid Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 155mm
- 1 axle per bag

$28.50
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many tandem hubs
- Type: Solid Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 187mm
- 1 axle per bag

$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many BMX hubs
- Type: Solid Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 187mm
- 1 axle per bag

$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many BMX hubs
- Type: Solid Axle
- Threads: 9.5mm x 24tpi
- Diameter: 9.5mm
- Length: 180mm
- 1 axle per bag

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Rear Left Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 16.9mm
- Length: 15mm
- 1 cone per bag
- Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024.
COMPATIBLE HUBS:
- Ultegra 6401 7-speed Rear
- Ultegra 6402 8-speed Rear
- 105 SC 1055 8-speed Rear
- 105 SC 1056 7-speed Rear
- XT-II M732 7-speed Rear

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Rear Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 16.9mm
- Length: 15mm
- 1 cone per bag
Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002.
COMPATIBLE HUBS:
- 105 FH-5700, 9 speed (right side cone)
- 105 SC 1051, 7 Speed Rear
- RX100 A551, 8 Speed Rear
- RSX 410, 7 Speed Rear
- Deore LX M550, 7 Speed Rear
- Deore Mtn LX M550, 7 Speed Rear

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Front 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Diameter: 14.8mm
- Length: 10.5mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- Road 400 CX Front
- HB-RM40 Front
- Shimano HB-RM40 Front
- HB-RA50 Front

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Front 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Diameter: 14.8mm
- Length: 10.6mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- Shimano HB-C201 Front
- 105 HB-1050 Front
- Deore LX/Mtn LX Front
- STX HB-MC32/30 Front
- Shimano HB-A410, HB-A416 Front

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Front 9mm x 1 axle
- 22mm metal dust seal is pressed on cone
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Cone Diameter: 15.0mm
- Dust Seal Diameter: 22mm
- Length: 11.4mm
- 1 cone per bag
COMPATIBLE HUBS:
- Shimano Nexave HB-T400 Front
- Shimano Deore HB-M510 Front
- STX HB-MC32/30 Front
- STX Parallax Front

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Right Rear Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 16.9mm
- Length: 9.5mm
- 1 cone per bag
COMPATIBLE HUBS:
- Tiagra 4400, 9 Speed Rear
- 105 SC 1056, 8 Speed Rear
- 105 SC 1055, 7 Speed Rear
- 105 SC 1051, 7 Speed Rear
- RX100 A551, 8 Speed Rear
- RSX 410, 7 Speed Rear
- XT M737, 8 Speed Rear
- XT-II M732, 7 Speed Rear
- Deore LX M565, 8 Speed Rear
- Deore LX/Mtn LX M550, 7 Speed Rear
- STX-RC MC38, 8 Speed Rear
- STX-RC MC30, 7 Speed Rear
- STX MC32/33, 7 Speed Rear
- Nexave IMC50, 8 Speed Rear
- Alivio MC18, 8 Speed Rear
- Alivio MC12, 7 Speed Rear
- Acera-X MC290, 7 Speed Rear
- Altus RM-40, 7 Speed Rear
- FH-R080 Silent Hub, 8 Speed Rear
- FH-R050 Silent Hub, 7 Speed Rear

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Left Rear Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Cone Diameter: 17.0mm
- Dust Seal Diameter: 25.5mm
- Length: 16.0mm
- 1 cone per bag
COMPATIBLE HUBS:
- XT M737, 8-spd Rear
- STX-RC MC38, 8-spd Rear
- STX/STX-RC MC30/32/33, 7-spd Rear
- Alivio MC18, 8-spd Rear
- Alivio MC12, 7-spd Rear
- Acera-X MC290, 7-spd Rear
- Altus RM-40, 7-spd Rear
- FH-R080 Silent Hub, 8-spd Rear
- FH-R050 Silent Hub, 7-spd Rear

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: Joytech, Joy U, KK 10mm x 1, rear
- Compatible with 10mm x 1 axle
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 17.0mm
- Length: 13.8mm
- 1 cone per bag
COMPATIBLE HUBS:
- Joytech, Joy U, KK 10mm x 1, rear
- Taiwanese rear hubs with 10mm x 1 axle

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: Sovos 9mm x 1, front hub
- Compatible with 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Diameter: 15.0mm
- Length: 12.8mm
- 1 cone per bag
COMPATIBLE HUBS:
- Sovos 9mm x 1, front hub
- Taiwanese and similar front hubs with 9mm x 1 axle

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech, Joy U, KK 9mm x 1, front hub
- Compatible with 9mm x 1 axle
- Cone Wrench Size: 15mm
- Threads: 9mm x 1
- Diameter: 15.0mm
- Length: 12.8mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- JoyTech, Joy U, KK 9mm x 1, front hub
- Taiwanese front hubs with 9mm x 1 axle

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: Joytech 9mm x 26, front hub
- Compatible with 9mm x 26 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 26
- Diameter: 15.0mm
- Length: 12.8mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- Joytech 9mm x 26, front hub
- Taiwanese hubs with 9mm x 26 axle
- 105 SC 1055 8-speed Rear
- 105 SC 1056 7-speed Rear
- XT-II M732 7-speed Rear

$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech 10mm x 26, rear hub
- Compatible with 10mm x 26 axle
- Cone Wrench Size: 15mm
- Threads: 10mm x 26
- Diameter: 17.0mm
- Length: 13.8mm
- Note: O-ring / seal not included.
- 1 cone per bag
COMPATIBLE HUBS:
- JoyTech 10mm x 26, rear hub
- Taiwanese hubs with 10mm x 26 axle