Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$40.00
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
$54.99
- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT
$6.99
- Removes brake pad material from alloy rims without damaging it - Use just like an eraser
$74.00
Shimano Genuine Professional disc brake bleed kit Includes: - TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port) - TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port) - TL-BR001 Syringe unit - 4-pcs set of Bleed Blocks (Piston spacer) Features: - New oil spill guard lid with an integrated oil stopper holder - Improved syringe unit design now using a stronger threaded tube joint and revised locking clip - Bleeding instructions available for download under 'Documents & Links' below
$74.00
Standard bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot - SRAM Model ID: DB-SPP-A0
$83.00
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
$19.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)
$22.99
Properly install your Ritchey carbon bars and stem without fear of over-torquing with their Torkey. This torque key uses an M4 bit and comes in 2 versions. The 5nm is the maximum recommended torque for Ritchey carbon bars and WCS stems, and the 4nm is for their Break Away frames.
$3.99
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running.
$4.99
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.
$124.99
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
$19.99
- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
$16.95
Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.
$15.99
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$12.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$23.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
$30.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting
$153.99
The BKM-1 Hydraulic Brake Bleed Kit will bleed most models of mineral-oil-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and for the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks, bleed funnel and a unique attachable syringe mount - Housed in a rugged reusable case - Machined 7075 aluminum fittings to service Shimano, Magura, Clarks, Promax, Tektro, TRP and other brands of mineral-oil-based hydraulic brake systems - Replacement parts available - Brake fluid not included
$24.95
A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush
$16.99
Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.
$22.99
Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).
$24.95
Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.
$13.95
The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti
$27.95
The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).
$33.95
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
$9.95
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.
$16.95
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
$30.95
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Page 1 of 4 Next page