Pumps/Inflation

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

- Ball-inflating needle for footballs, basketballs and more

- Alloy floor pump with steel anti-slip foot pad - 1-1/4" barrel diameter and 24" chamber height quickly inflates road and MTB tires - Includes plastic tips and sport needle accessories - Compatible with Schrader and Presta valves - Large easy to read 4" gauge - Max PSI: 160

If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the o-ring for the brass button under the lever, here's the replacement o-ring to get you back up and running.

Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 

You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Lezyne's lightweight, powerful Road Drive mini-pump quickly inflates your tires so you can get back on your bike. It features an aluminum barrel and handle for great style and durability. Reach up to 160 psi in a flash thanks to its oversize barrel and Slip Fit Presta-valve connection. And, its hose flexes for less valve stress and also stows in the handle for maximum portability.

Easy inflation The convenience of CO2 with the ever-ready capabilities of a mini pump, the Air Rush Road combines safe, controlled CO2 inflation with the back-up security of a telescoping pump. At just 72g, the Air Rush's compact design easily fits in a jersey pocket or seat pack. Product details - 2-in-1 design combines CO2 inflator and mini pump - Ultra-compact size easily fits in a jersey pocket or seat pack - Includes reusable cartridge insulator to protect hands - Pump inflates tires if you're out of CO2 - 72g - Includes two 16g cartridges, mounting bracket, and required hardware

Bontrager's Air Support Road hand pump is a highly durable pump with a small volume chamber for quick inflation of higher-pressure tires up to 115 psi. The fold-out lever locks the pump head securely to the valve for consistent airflow into the tire. Use the included bracket to easily mount it under your bottle cage. Available in two lengths: Long for more air per stroke, or Short for an easy fit into a jersey pocket.

Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.

A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)

A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)

Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.

For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)

The Airstep Bicycle Foot Pump combines the virtues of a classic floor pump with a foot pump. - Extra-large pressure gauge - Integrated storage space for the spiral hose and head - Aluminum foot pedal allows you to inflate with the ergonomic strength of your legs - Pump locks down and includes a wall bracket as a space-saving solution - Inflates to 7 bar/102 psi - Compatible with Presta, Schrader, and Dunlop Valves - Made in Germany

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

The SKS RideAir is the first refillable air tank from SKS for when you are on the road. It can be used in place of a pump or C02 cartridges emergency tire repairs. The RideAir effortlessly fills your tires in seconds. Simply refill the canister at home using your floor pump. This simple and environmentally friendly solution can be safely transported in your bottle cage. The RideAir is also a must have for tubeless tire riders: it saves space and sets up almost all tubeless tires. - Fits in a standard water bottle cage - Fills from an air compressor or high pressure pump via a Schrader valve - For tire inflation, fits to Presta, Schrader, or Dunlop valves - Integrated canister pressure gauge

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.

The ultimate travel floor pump. Compact, lay-flat design maximizes efficiency and portability. Durable and lightweight CNC machined aluminum construction. Felt-lined canvas bag protects pump during transport. Durable, anodized high-polish finish with a compact 1.5-inch gauge. ABS Flip-Thread Chuck equipped with Speed Chuck adapter. Features - Compact, flat laying design - CNC machined aluminum construction - Durable anodized high-gloss finish - Compact 1.5-inch gauge (160 psi / 11 bar) - ABS Flip-Thread chuck. - Canvas bag included Specs - Weight: 0.84kg | 1.85lbs - Max: 160psi | 11bar - Size: 50.8 x 19 x 60cm

Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.