Filter By:

  • Show More Brands
  • Show Fewer Brands

Trainers/Rollers

Tacx Blue Matic
$179.99
The Blue Matic is the intermediate model of Tacx's Blue cycletrainers. Its maximum resistance is 700 Watt. The Blue Matic has a magnetic brake with permanent-magnets. You set the resistance selecting one of the ten different positions via the handlebar resistance lever. During your training session the resistance increases as you cycle faster or switch to a heavier setting. The robust frame stands firmly on the ground and it is very user friendly because the trainer can be assembled in no time at all. Software: PC/laptop - Operation: Handlebar resistance lever Resistance: unit Magnetic Braking positions: 10 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter: 26"- 29" and 700c; 29" with trainer tyre
Tacx Blue Matic Smart
$229.99
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
Tacx Blue Twist
$159.99
The Blue Twist is streamlined and simple, featuring the performance Tacx's Blue trainers are known for, but without a handlebar resistance lever. You manually set the resistance, selecting one of the seven positions using a switch on the brake. The maximum resistance is 700 Watt. The Blue Twist is suitable as an entrance model. Software: PC/laptop - Operation: Switch on brake Resistance: unit Magnetic Braking positions: 7 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheel diameter: 26"- 29" and 700c; 29" with trainer tyre
Tacx Booster
$269.99
Prepare yourself in a professional manner and get your body in top condition with the Booster, the top model of the Tacx cycletrainers. Even at low speed the powerful magnetic brake generates high resistance; the maximum resistance is 1050 Watt. This makes the Booster highly suitable for simulating climbs and for interval training with short, intense sprints. The handlebar resistance lever allows you to set the level of resistance by selecting one of ten different positions. The brake is easy to assemble so you can get started straight away. The professionals with whom Tacx cooperates use the Booster for warming up for time-trials and other important stages. ‘‘The Booster gives me the same feeling like I have on the road”, says multiple time-trial world champion Tony Martin. Software PC/laptop - Operation Handlebar resistance lever Resistance unit Magnetic Braking positions 10 Descent simulation - Max brake power (10 sec.) 1050 Watt Sprint power (1 min.) 900 Watt Mass inertia 9,18 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Tacx FLUX 2 Smart
$899.99
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
Tacx FLUX Smart
$749.99 $899.99 17% Savings
The FLUX is a compact and realistic interactive direct drive trainer, with inner parts carefully selected to minimize sound levels. It combines FLUX Tacx direct drive technology with an electro brake in order to offer an accessible Smart and interactive direct drive. Simply remove your bike's rear wheel, mount the bike directly on the trainer, step on and start training. The Flux has been designed to enable you to really push your limits, especially when standing on the pedals. It offers the truest simulation of a pedal stroke as it is equipped with the heaviest flywheel to date - 7kg. The swift response of the Smart electronics and the flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. This trainer connects wirelessly to smartphones and tablets and knows the ANT+ FE-C protocol, enabling you to train with Tacx apps, as well as third-party apps like Zwift and TrainerRoad. You can also train stand-alone; if you do not connect the trainer it will simulate a flat road. It shows when it is connected to the mains and to a device over ANT+ or Bluetooth by an LED light on the side. The software receives the speed, cadence, and power from the trainer and controls the brake. With the Tacx Utility app, you can always benefit from the latest firmware for the Tacx trainer and check the connection with other devices. When an update is available, you receive a notification and you can decide whether you want to update your trainer. FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Various Shimano, SRAM & Campagnolo cassettes - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available - Suitable bikes: Race, Tri & MTB, Not suitable for a long cage rear derailleur - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1500 Watt - Max. slope: 10% - Simulation of descent: No - Max. torque: 22.1Nm - Max. brake force: 65N - Flywheel: Actual of 7kg - Mass inertia: 22.8kg - Calibration: Spin down - Footprint (lxw): 670×650mm (26.4×25.6in) - Height: 465mm (18.3in) - Dimensions when folded: Not foldable - Weight: 16kg (35.3lbs) - Article number: T2900 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <3%
Tacx Flow Smart
$369.99
The Flow Smart is an interactive smart trainer with an electro brake. It offers intensive training sessions with a wide range of app integration possibilities thanks to its open communication protocol. The electro brake makes this trainer highly accessible and ideal for keeping in tip-top condition during the winter. - Works with Apple and Android tablets and smartphones - Bluetooth and ANT+ FE-C communication capable - Electro brake with 6 powerful magnets - Integrated 3.5 lb flywheel - Maximum resistance 800 Watts - Skyliner front wheel support included - Simulate slopes up to 6% FEATURES - Type of trainer: Interactive Smart trainer with electric brake - Magnets: 6 Magnets - Transmission: Roller, 30 mm - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: Yes - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available - Supplied with: Quick release for road bikes and mountain bikes (5mm), Front wheel support SPECIFICATIONS - Max. power (40 km/h): 800 Watt - Max. slope: 6% - Simulation of descent: No - Max. torque: 15.3Nm - Max. brake force: 45N - Flywheel: Actual of 1,6kg - Mass inertia: 11.8kg - Calibration: Spin down - Footprint (lxw): 675×650mm (26.6×25.6in) - Height: 410mm (16.1in) - Dimensions when folded: 565×410×245mm (22.2×16.1×9.65in) - Weight: 9.41kg (20.7lbs) - Article number: T2240 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5%
Tacx Genius Smart
$799.99
This interactive trainer offers the most advanced brake of all the Tacx trainers with rear-wheel drive, so you can enjoy a highly realistic cycling experience. The motor brake is able to apply a maximum power of 1500 W to the back wheel and will speed up during a descent. The slopes simulated are realistic up to 20% and down to -5% for descents. The Genius communicates via ANT+ and Bluetooth Smart for convenient training sessions using your smartphone or tablet. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. The Genius offers ease-of-use and freedom of choice. When the Genius Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Motor brake -Realistic slope 20% 1 -Descent simulation -5% -Max brake power (10 sec.) 1500 Watt -Mass inertia 125 kg 2 -Suitable for all bikes, if necessary with axle skewers or nuts -Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Tacx Satori Smart
$329.99
The Satori Smart trainer uses complex technology in a user-friendly fashion. The resistance is set manually with the handlebar resistance lever offering 10 different resistance positons, from very easy to very strong. The Satori Smart can communicate via both ANT+ as well as Bluetooth® Smart. In the resistance unit an accurate measurement of your speed, cadence and power is performed. This data is then shown on the screen your using, whether this is a tablet, smartphone, sportwatch, or something else. During or after a training session you, or your coach, can thus monitor your performance closely. Since the Satori is not hooked up to the power net, you can use this trainer anytime and anywhere, also when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Handlebar resistance lever Resistance unit Magnetic Realistic slope 10 positions Descent simulation No Max brake power (10 sec.) 950 Watt Sprint power (1 min.) 800 Watt Mass inertia 16.93 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Tacx Vortex Smart
$429.99
The Vortex is an interactive Smart trainer with an electro brake. This resistance unit is suitable for an average training level and can reach a maximum resistance of 950 Watt. Instead of using a handlebar computer you train by connecting the Vortex quickly and easily to the Tacx apps or third party software. Of the many possible training options, you can choose the software that best matches you and your way of training. The Vortex communicates wirelessly via ANT+ and Bluetooth® Smart for convenient training sessions using your smartphone or tablet. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the Vortex Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Electro -Realistic slope 7% 1 -Descent simulation - -Max brake power (10 sec.) 950 Watt -Sprint power (1 min.) 750 Watt -Mass inertia 11,81 kg 2 -Suitable for all bikes, if necessary with axle skewers or nuts -Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Page 1 of 1