Filter By:
- Bar Ends (3)
- BMX (3)
- Bottom Brackets (25)
- Brakes/Levers/Pads (69)
- Cables (34)
- Cassettes/Freewheels (37)
- Chainrings (21)
- Chains (36)
- Show More Categories
- Cranksets (21)
- Derailleurs (33)
- Forks (10)
- Groups (1)
- Handlebar Grips/Tape (35)
- Handlebars (32)
- Headsets (10)
- Pedals (44)
- Saddles (21)
- Seatposts (13)
- Shift/Brake Combinations (10)
- Shifters (12)
- Stems (18)
- Other (111)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$22.00 - $24.00
- Chromoly steel with black oxide finish
- 1.37" x 24tpi right hand thread
- Requires a cog lockring (sold separately)
- Compatible with 1/8-inch chains
$37.99
Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence.
- Leather with steel hardware
- Intended for use with double-strap toe clips (sold separately)
- 114 grams per pair
- 420mm length
$40.00 - $45.00
These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains.
- Longevity, performance, and quiet operation
- Material: CNC-machined 7075-T6 Aluminum
- Chain Compatibility: 8-, 9-, or 10-speed compatible
$19.99 - $24.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$24.99
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$25.99 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $34.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$49.99
Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.
$49.99
$72.00
31% Off
Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.
$81.99
When you’re tackling rough trails, very little affects your confidence and control more than your brakes. With increased negative volume to combat heat expansion, plus powerful larger-caliper pistons, Avid's DB3 gives you the power and modulation to up your dirt-shredding game. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 4 fluid for better heat dissipation and resistance to brake fade.
Trim some weight and add some style to your ride with Bontrager's Race X Lite OS Stem. Made from forged 7050-T6 aluminum, this stem is exceptionally light and strong. In fact, it's equally suited to the sharp impacts of mountain biking as it is to the long-mile rigors of the road. And, its shot-peened finish offers exceptional strength while the 4-bolt faceplate makes installation easy, and the opposed-bolt steerer clamp is carbon friendly.
$6.99
Shimano compatible road caliper brake pads from Bontrager.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- Sleek brake pads and cartridges are Shimano compatible
- British Standard Compound (BS)—Long wearing pad compound
- Exceeds all US standards for brake pads—Sticky rubber for improved braking
- Sold in pairs
$7.00
Rejuvenate the performance of your drivetrain with this convenient and valuable cable.
- Rejuvenate the performance of your drivetrain with this convenient and valuable cable.
- Extra-long 3100mm length ensures fitment for any application
- Compatible with Shimano and SRAM drivetrains
- Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
$7.99
Improve the performance of your shifting with fresh cable and housing.
- Entry-level cable and housing set is great for servicing heritage bikes on a budget
- Galvanized cable is corrosion resistant and comes pre-stretched
- Includes one 1900mm cable and 1750mm of outer housing
$7.99 - $19.99
- All cables are pre-stretched
- Low-friction, slick surface cables for smooth braking action
- Can be used for road and mountain bikes
- Stainless steel kit is rust-proof
$7.99 - $16.99
- Quiets chain slap and protects chainstays from nicks and scratches
- Standard protector fits most chainstays
- Universal kits come with circle protectors to eliminate frame damage due to cable rub
$9.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases.
Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
Key features:
- Bases for use with Elite stem
- Add any XXX accessory mount for an elegant integrated look
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition. The 90mm width of these grips accommodate twist shifters.
$12.99 - $14.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip
$14.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar
$14.99
$29.99
50% Off
The Bontrager City Pedal Set delivers comfortable foot support and reliable traction to keep you confidently connected to your bike. It features reflective edges on the front and rear to add visibility in low-light conditions, and a strong, durable, and easily serviceable chromoly axle to keep you rolling smoothly ride after ride.
- Nylon concave body supports and stabilizes foot while pedaling
- Anti-slip texture for traction and confidence
- Front and rear reflective panels add visibility in low-light conditions
- Durable chromoly spindle with long- lasting, serviceable bearings
- Installs with 6mm hex key or flat 15mm pedal wrench
$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with the Bontrager XXX Integrated bar/stem, as seen on the Emonda SLR 10
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$15.99
Genuine Bontrager replacement headset spacers.
- Precision-machined aluminum construction
- Precision cut to ensure proper headset function
- Sold in packs of 3
$15.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately
$16.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands
$17.99
Original equipment replacement rear derailleur hangers.
Get back on the road with a quality replacement hanger.
Product details
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications
- Mounting location: Rear drive side
- Attachment: 1-bolt
$18.98 - $18.99
A lock-on grip with a unique finned texture for added comfort and control.
Get a grip on sustainability
The XR Trail Comp grip features a unique finned texture that conforms to your hand to keep you comfortable all day while you ride. Plus, a lightweight nylon CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics.
Product details
- Finned texture pattern conforms to your hand for supportive grip
- Rubber compound and tread design are optimized for control and comfort
- Grip core made with recycled ocean-bound plastic
- Single-clamp design maximizes grip surface for secure, predictable performance
- Nylon CoreLock clamp offers dual clamp strength
- 3mm M4 bolt increases hold and resists stripping
- 31mm diameter
$19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager Pro Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Page 1 of 20
Next page