Other

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

- Thin, durable, wide black chainstay protector with extra-strong adhesive - Includes alcohol prep pad to clean chainstay - 8 mil thickness - 10 pack Application: Recommended application temperature: 60 - 85 degrees fahrenheit. Water may be used to aid positioning during installation. Let adhesive cure for a minimum of 20 minutes before riding. Removal: Recommended angle for removal is 30 - 60 degrees from the surface. A steamer may be used to aid removal.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

Original equipment replacement parts for your ride. - For specific Bosch equipped eBikes only - Mounting hardware sold separately

Shimano Y8H298040 SM-BH59 Olive and connecting insert

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Travel Adjustment Spacers for the Resolve dropper post. The travel height of the dropper post can be reduced in 5 mm increments up to 50 mm height reduction with 10 spacers.

- Saddle clamp for straight seatpost - Diameter: 22.2mm

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

Genuine replacement parts Keeps your bike looking like new. Protects your bike from the elements. - Used in place of Range Extender system - Black frame plug

Genuine replacement parts Keeps your bike looking like new. Protects your bike from the elements. - Used in place of Range Extender system - Black frame plug

Trek proprietary suspension hardware. - Trek full suspension rocker pivot suspension hardware - First used as ABP Spacer for Top Fuel 26 2009 and other ABP Race designs - Widely used as rocker link pivot spacer 2016-2022

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Trek proprietary suspension hardware. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs