Other

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Front, Not applicable - Mounting location: Front - Attachment: Thru axle nut

For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Allows use of standard stem with your Domane. - Keeps a clean aesthetic - For specific compatibility concerns, please contact our Customer Service team

For proper assembly. - For use with 2008-09 6-Series, 2008-10 5-Series, 2008-2011 4-Series Madones, District Carbon - Durable steel bearing housing

Allows use of two Blendr mounts on a Trek Madone SLR. Genuine replacement parts Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike. Product details - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Includes mounting hardware

Upgrade or refresh your bike. - Affordable alloy seat mast cap - Direct fit on all Trek road bikes with round seat masts - 2-bolt design offers independent setback and tilt adjustments - Includes 7mm round saddle clamp ears

Integrates seamlessly with basebar. - Only compatible with Speed Concept - For specific compatibility concerns, please contact our Customer Service team

Don't be left hanging. - Universal Derailleur Hanger - or UDH - offers greater derailleur protection - Designed to rotate rearward in event of an impact - Works with all drivetrains - 30mm washer provides full coverage over ABP bearing seals - Included attachment hardware is reverse threaded

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

These clamp sets can be used on any of the Thomson Seatpost line (Elite, Masterpiece, & Droppers)

Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.

Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

Flat Mount Disc Caliper Bracket Bolts

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.

Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp. - Installation hardware included - Anodized black - Sold each

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light and durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt - Weight: 12g

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Cassette Seal: Fits all ratchet drive hubs

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl

- Replacement semi-cartridge bearings for Cane Creek 10-Series headsets - Bearing I.D. (mm): 30 mm - Bearing O.D. (mm): 41 mm - Bearing Type: Cartridge - Cartridge Bearing Angle: 36x45 - Thickness: 6.5 mm

Replacement stainless steel cartridge bearings for Cane Creek 110 headsets - 38mm, 41mm, and 42mm are sold in pairs - 52mm sold individually

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. - Cane Creek Hellbender Bearing, 41mm SHIS

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals. - Kit includes 2 bearings and 2 seals