At just 103 grams, Ritchey's C-260 is among the lightest stems in the world. This revolutionary design starts with a handlebar clamp that wraps a full 260 degrees around the bar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. The steerer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube. So you can run carbon bars and a carbon steerer no problem. Weight and stiffness were prime considerations; the C-260 is 3D forged from 7050 aluminum and machined, even the steel M4 bolts shave a few grams with no sacrifice in strength or rigidity.
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
$44.99 - $54.99
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
$47.49 - $49.99
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
$23.99 - $29.99
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)
Trim some weight and add some style to your ride with Bontrager's Race X Lite OS Stem. Made from forged 7050-T6 aluminum, this stem is exceptionally light and strong. In fact, it's equally suited to the sharp impacts of mountain biking as it is to the long-mile rigors of the road. And, its shot-peened finish offers exceptional strength while the 4-bolt faceplate makes installation easy, and the opposed-bolt steerer clamp is carbon friendly.
Bontrager's SSR Stem is made of forged 6000 aluminum for awesome strength. The 2-bolt faceplate makes it super easy to install and distributes the clamping force on your bars. Plus the opposing bolts on the steerer clamp ensure safe and secure tightening. This stem can be flipped for a positive or negative rise.
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes. - 6061-T6 cast body construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts - Blendr ready for seamless accessory integration - Compatible with Blendr Elite bases and Blendr mounts - Suitable for use on a road, city, or mountain bike - Safe for use on carbon steerer tubes and handlebars
Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm
$39.99 - $41.99
Oversized diameter 35 mm stem accessible to all mountain riders. Oversized and in control Equip your whip with this 35mm Line stem and give yourself the oversized advantage. Forged from 6061-T6 3D aluminum, this 0-degree stem provides the increased strength of the latest mountain-specific bar diameter. Product details - Oversized 35mm clamp diameter provides a new level of strength and weight savings - Forged from 6061-T6 3D aluminum - Laser etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects the frame from impacts by fork and handlebars by eliminating over-rotation of bars - Available in a wide range of sizes for today's mountain rider - Safe for carbon bars
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
The perfect fit The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration. Product details - Blendr Elite allows seamless accessory integration - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Suitable for both MTB or road use - Includes Blendr mono base and accessory mounts
Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro! - Low-Near = 17° rise / 77mm length - Low-Far = 100° rise / 110mm length - Mid-Near = 50° rise / 67mm length - Mid-Far = 45° rise / 110mm length - High-Near = 80° rise / 67mm length - High-Far = 75° rise / 110mm length
Strong, light, and capable The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars
A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer. Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer. Product details - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - High-strength, corrosion-resistant steel bolts - Includes Blendr mono base, Garmin Mount, and Ion Light Mount - Approved for carbon bars
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
An ultralight OCLV Carbon stem with flush-fit faceplate bands and Blendr integration for a clean look. The lightweight stem for seamless integration OCLV Carbon construction of the RSL Blendr stem combines lightweight strength with a classy aesthetic. It's equipped with captured titanium hardware that ensures you never drop bolts again, and the dual-banded faceplate shaves weight and works seamlessly with mounted accessories using the Blendr integration system. Product details - Ultra-light OCLV Carbon construction - Flush-fit 4-bolt dual band bar clamps offer seamless look - Captured Titanium screws save weight while making installation easy - Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts - Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories - Approved for carbon bars and steerer tubes
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
An integrated bar and stem combo that cleanly and securely holds cables for a refined look and added aerodynamics. Save watts, ride faster This aero upgrade cleans up your cockpit by securely storing cables for a refined look and free speed. The Aeolus RSL bar/stem combo is proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor. It's light, fast, easy to install, and Blendr-compatible for seamless integration of your light or Garmin. Product details - OCLV Carbon construction is ultra-light, compliant, and durable - Integrated bar/stem design improves aerodynamics and saves weight - Proven in the wind tunnel to save 7 watts, making it 10 % faster than its predecessor - Integrated cable management system held secure with M4 hex bolt, 5Nm torque - Variable Radius Compact (VR-C) design allows longer reach and drop - Includes Blendr mono and duo bases with mounts for Ion light and Garmin computer - Approved for use with carbon or alloy steerer
Page 1 of 1